Name: Mass Production CNC Machining Brass Manufacturers Suppliers Factory - Ruixing
Brand: Ruixing
SKU: 186090032

CNC Machining Brass

CNC turning 800C

Detailed Description :

Product name:	CNC Machining Brass
Material:	CuZn39Pb3/CuZn39Pb2/CuZn38Pb1.5/CuZn37Pb2/CuZn40Pb2/ MS 58/BS2874/IS 319 (Type I & II)
Process:	CNC turning,CNC Milling,CNC turning and milling parts
Surface treament:	None
MOQ:	1PCS
Delivery time:	7-30days
Packing:	With plastic bag,with pearl-cotton package
Delivery:	Deliver by DHL,FedEx,EMS.Or according to customers' requirement.

Our Brass material :

Brass Alloy:CuZn39Pb3 / CuZn39Pb2 / CuZn38Pb1.5 / CuZn37Pb2 / CuZn40Pb2 / MS 58 / BS2874 / IS 319 (Type I & II).

UNS (ASTM):C35300 / C35330 DZR / C36000 (CDA 360) / C36500 / C37000 / C37100 / C37700 / C37710 / C38500.

BS:CZ121 / CZ122 / CZ124 / CZ128 / CZ 131 / CZ132.

EN:CW602N / CW603N / CW606N / CW608N / CW612N / CW614N / CW617N

IS:C3601 / C3602 / C3603 / C3604 / C3605 / C3712 / C3771

CNC Machining Brass

CNC turning Brass

CNC milling Brass

Ordinary Brass：

It is an alloy composed of copper and zinc.

When the zinc content is less than 35%, zinc can be dissolved in copper to form single-phase α, called single-phase brass, which has good plasticity and is suitable for hot and cold press processing.

When the zinc content is 36%~46%, there are α single phase and β solid solution based on copper and zinc, which is called dual-phase brass. The β phase reduces the plasticity of brass and increases the tensile strength, which is only suitable for Hot pressure processing.

If the mass fraction of zinc continues to increase, the tensile strength will decrease and it will have no use value.

The code is represented by "H + number", H represents brass, and the number represents the mass fraction of copper.

For example, H68 means brass with a copper content of 68% and a zinc content of 32%. For cast brass, add the word "Z" before the code, such as ZH62.

For example, ZCuZnzn38 represents a cast brass with a zinc content of 38% and the balance of copper.

H90, H80 belong to single-phase brass, golden yellow.

H59 belongs to duplex brass and is widely used in structural parts of electrical appliances, such as bolts, nuts, washers, springs, etc.

In general, single-phase brass is used for cold deformation processing, and dual-phase brass is used for hot deformation processing.

Our CNC parts:

We can produce Brass cnc parts, Brass cnc turning parts,stainless steel cnc parts,Aluminum cnc parts,plastic cnc parts,Titanium alloy cnc parts.

cnc machining brass

cnc machining aluminum

cnc machining stainless steel

cnc machining steel

cnc machining titanium alloy

CNC Machining Delrin Plastic Product (8).jpg

cnc machining plastic

Our Factory:

Shenzhen Ruixing Precision MFG. was established in 2005 and has a large-scale factory with a total area of 2200 square meters in Shenzhen. We have advanced technology and strong financial strength, we focus on CNC custom processing.

We sincerely hope to cooperate with you to create a better future!

cnc milling workshop

cnc turning workshop

Quality inspection departments

We have Keyence IMG measurer,VDM-3020 Projector.Tesa height guage,Roughness tester,thread gauge,hardness tester,internal micrometer,external micrometer,Pin gauge and block gauge.