Properties and Applications of Brass

1, h59 brass: h59 ordinary brass; cheap, high strength and hardness, but can still withstand pressure processing well under heat treatment, good corrosion resistance, and other properties are similar to h62.

For general machine parts, welding parts, (Jinguang) hot stamping and hot rolling parts.

2, h62 brass: ordinary brass; it has good mechanical properties, good plasticity in hot state, good plasticity in cold state, good machinability, easy brazing and welding, corrosion resistance, and low price.

Use a common brass variety of repeat offenders. Presented parts for various deep drawing and bending manufacturing, such as pins, rivets, washers, nuts, conduits, barometer springs, screens, radiator parts, etc.

3, h63 brass: h63 national standard brass; suitable for cold pressure processing, and Jinguang brass is suitable for welding and brazing. Easy to polish, it is the main combination for drawing, rolling, bending, etc.

gold. For screws, round rollers for pickling, etc.

4, h65 brass: h65 national standard brass; the performance is between h68 and h62, the price is cheaper than h68, and it also has high strength and plasticity, and can well withstand cold and hot pressure processing. for small

Hardware, daily necessities, small springs, screws, rivets and mechanical parts.

5. H68 brass: National standard brass; has very good plasticity (the best among brass) and high strength, good cutting performance, easy to weld, not stable to general corrosion, but easy to produce

Cracked. It is a variety that is widely used in ordinary brass. Jinguang Brass is used for complex cold-drawn and deep-drawn parts, such as radiator shells, conduits, bellows, cartridge cases, gaskets, etc.

6, h70 brass: neutral brass; has very good plasticity (the best in brass) and high strength, good cutting performance, easy to weld, non-stable to general corrosion, used for complex

of cold-drawn and deep-drawn parts, such as radiator shells, conduits, bellows, cartridge cases, gaskets.

7, h75 brass: h70 neutral brass; has quite good mechanical properties, process properties and corrosion resistance. Works well in both hot and cold states. Ranked in the h80 in terms of performance and economy

, between h70. For low load corrosion resistant springs.

8. H80 brass: h80 high-precision brass; similar in performance to h85, but with higher strength and better plasticity, and has higher corrosion resistance in the atmosphere, fresh water and seawater. For paper making wire, thin wall tube, corrugated

Pipes and house building supplies.

9, h85 brass: h85 high-precision brass; has high strength, good plasticity, can well withstand cold and hot pressure processing, welding and corrosion resistance. For condensation and cooling pipes, siphons,

Coiled tube, cooling equipment parts. 10, h90 high-precision brass; similar in performance to h96, but slightly higher in strength than h96, can be plated with metal and extruded to apply enamel. For water supply and drainage, medallions, artwork, water

Case straps and bimetals.

10, H96 brass: higher strength than red copper (but in ordinary brass, it is low), good electrical and thermal conductivity, high corrosion resistance in the atmosphere and fresh water, and good plasticity, easy to use. cold,

Hot pressure working, easy to weld, forged and tinned, no tendency to stress corrosion cracking

Product Specifications

brass strip—thickness: 0.01-2.0mm, width: 4-600mm

brass plate—thickness: 0.2-100mm, width: 305-1000mm, length: 1200-2000mm

brass wire - wire diameter: 0.01-15.0mm

brass tube - wall thickness: 0.1-100mm, outer diameter: 1-600mm

brass rod—diameter: 1.0-200mm, length: 2500-6000mm

We can produce the customized brass cnc parts.Feel free to contact me if you need the products.thanks.

Customized brass screw

Customized Brass cnc parts