HDPE Roller End Bearing
Detailed Description of HDPE Roller End Bearing
| Product name: | HDPE Roller End Bearing |
| Material: | POM, Delrin, Acrylic, PEEK, PEI, PPS, HDPE, PTFE, Nylon66 GF30, PBT |
| Process: | CNC turning.CNC milling |
| Surface treament: | None |
| MOQ: | 1PCS |
| Delivery time: | 7-30days |
| Packing: | 1.With plastic bag,with pearl-cotton package HDPE Roller End Bearing. |
| Delivery: | Deliver by DHL,FedEx,EMS.Or according to customers' requirement. |
Our plastic material : POM, Delrin, Acrylic, PEEK, PEI, PPS, HDPE, PTFE, Nylon66 GF30, PBT, etc.
HDPE Roller End Bearing
Roller End Bearing
HDPE Roller End Bearing
Our plastic cnc machining parts:ACrylic cnc turning parts,Delrin cnc turning parts,HDPE cnc turning parts,PEEK cnc turning parts,PTFE cnc turning parts,PU cnc turning parts.
Acrylic cnc turning parts
Delrin cnc turning parts
HDPE cnc turning parts
PEEK cnc milling parts
PTFE cnc turning parts
PU cnc turning parts
Our products:CNC aluminum parts,CNC stainless steel parts,CNC brass & copper parts ,CNC plastic parts,CNC steel parts ,CNC titanium alloy parts
|
|  |
| CNC Alu6063 parts | CNC SS303 parts | CNC H59 parts |
 |  |  |
CNC Acrylic parts | CNC steel1018 parts | CNC titanium alloy parts |
HDPE Material:
High-density polyethylene (HDPE) is a white powder or granular product. It is non-toxic, tasteless, crystallinity is 80%-90%, softening point is 125-135℃, service temperature can reach 100℃; hardness, tensile strength and creep are better than low-density polyethylene; wear resistance, electricity Good insulation, toughness and cold resistance; good chemical stability, insoluble in any organic solvents at room temperature, corrosion resistance to acids, alkalis and various salts; low permeability to water vapor and air, water absorption Low; poor aging resistance, environmental stress cracking resistance is not as good as low-density polyethylene, especially thermal oxidation will reduce its performance, so antioxidants and ultraviolet absorbers must be added to the resin to improve this deficiency. High-density polyethylene film has a lower thermal deformation temperature under stress, so pay attention to it when applying it.
feature
High-density polyethylene has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. Dielectric properties and environmental stress cracking resistance are also good. Hardness, tensile strength and creep are better than low-density polyethylene; abrasion resistance, electrical insulation, toughness and cold resistance are all better, but slightly worse than low-density insulation; good chemical stability, at room temperature Under the conditions, it is insoluble in any organic solvents, resistant to corrosion by acids, alkalis and various salts; the film has low permeability to water vapor and air, and has low water absorption; poor aging resistance, and environmental cracking resistance is not as good as low-density polyethylene. In particular, thermal oxidation will reduce its performance. Therefore, the resin needs to be added with antioxidants and ultraviolet absorbers to improve and improve this deficiency. The high-density polyethylene film has a lower heat distortion temperature under stress. This point should be paid attention to when applying
The main purpose
High-density polyethylene resin can be used to form plastic products by injection, extrusion, blow molding and rotational molding. Various types of containers, industrial accessories, medical supplies, toys, shells, bottle stoppers and protective covers can be molded by injection molding. Various hollow containers, ultra-thin films, etc. can be formed by blow molding. Extrusion can be used to form pipes, stretch strips, straps, monofilaments, wire and cable sheaths, etc.
In addition, it can also form decorative panels for construction, shutters, synthetic wood, synthetic paper, synthetic film, and molded calcium plastic products, etc.
Our Factory：
Our machinery and equipment：
We have passed the ISO 9001-2015 quality certification system.
Our Packing and Delivery:
With plastic bag,with pearl-cotton package for Teflon Sensor Base.
Pack according to customer requirements.
Deliver out by DHL,FedEx. Or according to customers' requirement.
Customer Review of HDPE Roller End Bearing:
FAQ:
Q．Can it be delivered quickly (or how many days are guaranteed for delivery, and the delivery period)?
A．The sample lead time is 7-15 days, and the mass production lead time is 25-30 days.
Q．Are there any different advantages in logistics and transportation?
A．Our mode of transportation is FedEx, UPS. DHL EMS and other methods.
Q．What are your payment methods?
A．The payment methods we can accept are Paypal, T/T, bank transfer, and Alibaba Credit Guarantee orders.
Q．What are your payment methods?
A．Our payment method is: Below 3,000 USD, 40% is paid in advance, and the remaining 60% is paid before shipment.
Send us drawing for getting price if you have project need our help.
Contact us:
Contact : Penny Peng
Email: sales2@ruixing-mfg.com
Tel.:86-755 27323379 Mobile.: +86 13530245060
Add.:2nd Floor Building 8 Dadu Industrial Park BaiShiXia Fu Yong BaoAn ShenZhen China