Copper Support Plate
Detailed Description of Copper Support Plate:
| Product name: | Copper Support Plate |
| Material: | Brass H59,C3604, |
| Process: | CNC turning, CNC milling |
| Surface treament: | None |
| MOQ: | 1PCS |
| Delivery time: | 7-30days |
| Packing: | With plastic bag,with pearl-cotton package for Copper Support Plate. |
| Delivery: | Deliver by DHL,FedEx,EMS.Or according to customers' requirement. |
Our Brass material : Brass, C36000, copper, C11000, C23000, CuW90/10, 101OFC, bronze, Tin Bronze CuSn8 etc.
CNC Turning Copper Support Plate
Copper Support Plate
CNC milling Copper Plate
The difference between copper and brass:
Copper: also called red copper, that is, pure copper, red copper and brass are different in color and quality! In fact, the color is clear at a glance, as the name implies! Due to the surface oxidation, there is a layer of red cuprous oxide, which looks like The color is purplish red. The quality of red copper is harder than brass, and the weight is about the same
Brass: Brass is an alloy composed of copper and zinc. If it is only composed of copper and zinc, brass is called ordinary brass. If it is composed of two or more elements in multiple alloys, it is called special brass. For example, a copper alloy composed of lead, tin, manganese, nickel, lead, iron, and silicon. Brass has strong wear resistance. Special brass is also called special brass. It has high strength, high hardness and strong chemical resistance. There are also outstanding cutting mechanical properties. The seamless copper tube is drawn from brass, which is soft and has strong wear resistance. Brass seamless pipes can be used for heat exchangers and condensers, cryogenic pipelines, and subsea transportation pipes. Manufacture of sheets, bars, bars, pipes, casting parts, etc. 62%～68% copper, strong plasticity, manufacturing pressure equipment, etc.
The difference between copper and brass
1. Appearance color
Brass: It is light golden yellow and shiny.
Copper: Rose red, shiny.
2. Ingredients
Red copper: The content of copper has reached 99.9%.
Brass: about 60% of copper; about 40% of zinc; some grades contain about 1% of lead, which is impurity.
3. Strength
Brass: higher.
Copper: lower.
4. Different density and usage
The density of brass (8.93g/cm3) is mostly used for mechanical bearing lining, and it is wear-resistant. Brass castings are often used to make valves and pipe fittings. Ordinary brass has a wide range of uses, such as water tank belts, water supply and drainage pipes, medals, bellows, serpentine tubes, condenser tubes, bullet casings and various complex shaped punching products, small hardware parts, etc. As the zinc content increases from H63 to H59, they can withstand thermal processing well, and are mostly used in various parts of machinery and electrical appliances, stamping parts and musical instruments.
Red copper. Pure copper, also known as red copper, has a density (7.83g/cm3), a melting point of 1083 degrees, and is non-magnetic. It has good electrical conductivity, thermal conductivity, corrosion resistance, and toughness. Red copper is malleable. Pure copper the size of a drop of water , It can be drawn into a filament that grows up to two kilometers, or rolled into an almost transparent foil larger than the bed. The most valuable property of copper is its very good electrical conductivity, second only to silver in all metals. But copper is cheaper than silver. Much more, so it has become the "protagonist" of the electrical industry.
5. Difference in conductivity
Brass: lower. Copper: higher.
6. The difference in corrosion resistance
Brass: Inferior. Copper: better.
7. The difference in cutting performance
Brass: better. Copper: poor.
Our products:
We can produce CNC aluminum parts,CNC stainless steel parts,CNC brass or copper parts ,CNC plastic parts,CNC steel parts ,CNC titanium alloy parts .
|
|  |
| Alu2071 CNC parts | Stainless steel 303 CNC parts | Brass H59 CNC parts |
 |  |  |
PC CNC parts | Q235 steel CNC parts | Titanium alloy Grade5 CNC parts |
Our processing range and tolerances
Processing | Machinable | Tolerance |
CNC turning/lathe | Diameter0.5-360mm X Length 750mm | +/-0.005mm |
CNC milling | 700(L)X500(W)X500(H)mm | +/-0.01mm |
CNC laser cutting | 0.3-20.0mm thickness | +/-0.1mm |
other machining | Drilling,Tapping,Grinding,Wire -EDM,etc | +/-0.005mm |
Our machinery and equirment
Our Factory:
Ruixing was founded in 2005 and passed ISO9001-2015. We are specialized in CNC machining parts for 16 years more. We are your professional partner of machining parts manufacturing.
Customization process of CNC Machined Brass Adapter:
Customer feedback：
FAQ:
Q: What information is required for quotation?
Ａ:1.Detailed drawings(format:CAD/PDF/DWG/DXF/DXW/IGES/STEP etc.)
2.Material,
3.surface treatment,
4. quantity
Q:What is the minimum order quantity?
A:Small batches are acceptable.
Q:Do you need a sample fee?
A:Yes, a sample fee is required. However, the sample fee can be returned appropriately during mass production.
Q:How long is the delivery time?
A:7-15 days for sample order, 25-30 days for mass production. According to the quantity and quality of the products, the delivery time will be different．
Send us drawing for getting price if you have project need our help.
Contact us:
Contact : Penny Peng
Email: sales2@ruixing-mfg.com
Tel.:86-755 27323379 Mobile.: +86 13530245060
Add.:2nd Floor Building 8 Dadu Industrial Park BaiShiXia Fu Yong BaoAn ShenZhen China